Nanthiya
Kasetsart University ｜ Associate Professor
論文著作
Papers
•Sarilak, D., Kerdlap, W., Embley, B., Chisti, Y., Hansupalak, N. “Model-based design, synthesis and use of thermally insulating mortar formulations for energy conservation in buildings”, Journal of Cleaner Production 276 (2020) 124287.
•Kerdlap, W., Thongpitak, C., Keawmaungkom, S., Warakulwit, C., Supaporn Klangprapan, Choowongkomon, W., Chisti, Y., Hansupalak, N. “Natural rubber as a template for making hollow silica spheres and their use as antibacterial agents”, Microporous and Mesoporous Materials 273 (2019) 10–18.
•Phattharachindanuwong, C., Hansupalak, N., Plank, J., Chisti, Y. “Template-assisted facile synthesis and characterization of hollow calcium silicate hydrate particles for use as reflective materials”, Materials Research Bulletin, 97 (2018) 343-350.
•Jantawatchai, K., Jitpluem, S., Kerdlap, W., Phanawadeea, P., Warakulwit, C., Chisti, Y., Hansupalak, N. “Production and characterization of a novel hierarchical porous silica adsorbent for removal of methylene blue dye from wastewaters” Chemical Engineering Communications, 204 (2017) 1452-1465
•Wiroonpochit, P., Uttra, K., Jantawatchai, K., Hansupalak, N., Chisti, Y. “Sulfur-Free Prevulcanization of Natural Rubber Latex by Ultraviolet Irradiation in the Presence of Diacrylates” Industrial & Engineering Chemistry Research, 56 (2017) 7217–7223.
•Phattharachindanuwong, C., Hansupalak, N., Jantawatchai, K., Warakulwit, C., Plank, J., Chisti, Y. “Production and characterization of hierarchical porous silica made using natural rubber astemplate: Effects of the template removal methods,the pH of production, and the natural rubbersources” Chemical Engineering Research and Design 113 (2016) 273–283.
•Hansupalak, N., Piromkraipak, P., Tamthirat, P., Manitsorasak, A., Sriroth, K., Tran, T. “Biogas reduces the carbon footprint of cassava starch: a comparative assessment with fuel oil” Journal of Cleaner Production Volume 134, Part B (2016) 539–546. Special Volume: Green and Sustainable Innovation for Cleaner Production in the Asia-Pacific Region
•Ong-on, I., Embley, B., Chisti, Y., Hansupalak, N.“Prediction of pore properties of hierarchical porous silica template on natural rubber” Microporous and Mesoporous Materials 233 (2016) 1–9.
•Hansupalak, N., Srisuk,S., Wiroonpochit, P., Chisti, Y.“Sulfur-Free Prevulcanization of Natural Rubber Latex by UltravioletIrradiation” Industrial & Engineering Chemistry Research, 55 (2016) 3974–3981.
•Sirirat, T., Vatanatham, T., Hansupalak, N., Rempel, G.L., Arayapranee, W. “Kinetics and modeling of methyl methacrylate graft copolymerization in the presence of natural rubber latex” Korean Journal of Chemical Engineering, 32 (2015) 980–992.
•Sirirat, T., Vatanatham, T., Hansupalak, N., Rempel, G.L., Arayapranee, W. “Kinetic study of styrene and methyl methacrylate emulsion polymerization induced by cumene hyeroxide/tetraethylenepentamine” Journal of Polymer Research, 22 (2015) 16 (11 pages). DOI 10.1007/s10965-014-0643-9.
•Junoi, S., Chisti, Y., Hansupalak, N. “Optimal conditions for deproteinizing natural rubber using immobilized alkaline protease”Journal of Chemical Technology & Biotechnology, 90 (2015), 185–193.
•Phatharachindanuwong, C., Hansupalak, N., Chareonpanich, M., Chisti, Y., Limtrakul, J., Plank, J. “Morphology and adsorption capacity of sodium silicate-based hierarchical porous silica template on natural rubber: Influence of washing–drying methods” Materials Letters, 130 (2014) 206–209.
•Prasertkittikul, S., Chisti, Y., Hansupalak, N. “Deproteinization of natural rubber using protease immobilized on epichlorohydrin crosslinked chitosan beads” Industrial & Engineering Chemistry Research, 52 (2013) 11723-11731.
•Songsing, K., Vatanatham, T., Hansupalak, N. “Kinetics and Mechanism of Grafting Styrene onto Natural Rubber in Emulsion Polymerization using Cumene Hyeroxide–Tetraethylenepentamine as Redox Initiator” European Polymer Journal, 49 (2013) 1007–1016.
•Aroonsingkarat, K., Hansupalak, N. “Prediction of Styrene Conversion of Polystyrene/Natural Rubber Graft Copolymerization Using Reaction Conditions: Central Composite Design vs. Artificial Neural Networks” Journal of Applied Polymer Science, 128 (2013) 2283–2290.
•Sresungsuwan, N., Hansupalak, N. “Prediction of Mechanical Properties of Compatibilized Styrene/Natural-Rubber Blend by Using Reaction Conditions: Central Composite Design vs. Artificial Neural Networks” Journal of Applied Polymer Science, 127 (2013) 356–365.
•Srithong, S., Jiraratananon, R., Hansupalak, N. “A Simple Postsulfonation of Poly(arylene ether sulfone) Radel R” Journal of Applied Polymer Science, 119 (2011) 973–976.
•Phompan, W., Hansupalak, N. “Improvement of proton-exchange membrane fuel cell performance using platinum-loaded carbon black entrapped in crosslinked chitosan” Journal of Power Sources, 196 (2011) 147–152.
•Kerdlap, W., Thongpitak, C., Keawmaungkom, S., Warakulwit, C., Supaporn Klangprapan, Choowongkomon, W., Chisti, Y., Hansupalak, N. “Natural rubber as a template for making hollow silica spheres and their use as antibacterial agents”, Microporous and Mesoporous Materials 273 (2019) 10–18.
•Phattharachindanuwong, C., Hansupalak, N., Plank, J., Chisti, Y. “Template-assisted facile synthesis and characterization of hollow calcium silicate hydrate particles for use as reflective materials”, Materials Research Bulletin, 97 (2018) 343-350.
•Jantawatchai, K., Jitpluem, S., Kerdlap, W., Phanawadeea, P., Warakulwit, C., Chisti, Y., Hansupalak, N. “Production and characterization of a novel hierarchical porous silica adsorbent for removal of methylene blue dye from wastewaters” Chemical Engineering Communications, 204 (2017) 1452-1465
•Wiroonpochit, P., Uttra, K., Jantawatchai, K., Hansupalak, N., Chisti, Y. “Sulfur-Free Prevulcanization of Natural Rubber Latex by Ultraviolet Irradiation in the Presence of Diacrylates” Industrial & Engineering Chemistry Research, 56 (2017) 7217–7223.
•Phattharachindanuwong, C., Hansupalak, N., Jantawatchai, K., Warakulwit, C., Plank, J., Chisti, Y. “Production and characterization of hierarchical porous silica made using natural rubber astemplate: Effects of the template removal methods,the pH of production, and the natural rubbersources” Chemical Engineering Research and Design 113 (2016) 273–283.
•Hansupalak, N., Piromkraipak, P., Tamthirat, P., Manitsorasak, A., Sriroth, K., Tran, T. “Biogas reduces the carbon footprint of cassava starch: a comparative assessment with fuel oil” Journal of Cleaner Production Volume 134, Part B (2016) 539–546. Special Volume: Green and Sustainable Innovation for Cleaner Production in the Asia-Pacific Region
•Ong-on, I., Embley, B., Chisti, Y., Hansupalak, N.“Prediction of pore properties of hierarchical porous silica template on natural rubber” Microporous and Mesoporous Materials 233 (2016) 1–9.
•Hansupalak, N., Srisuk,S., Wiroonpochit, P., Chisti, Y.“Sulfur-Free Prevulcanization of Natural Rubber Latex by UltravioletIrradiation” Industrial & Engineering Chemistry Research, 55 (2016) 3974–3981.
•Sirirat, T., Vatanatham, T., Hansupalak, N., Rempel, G.L., Arayapranee, W. “Kinetics and modeling of methyl methacrylate graft copolymerization in the presence of natural rubber latex” Korean Journal of Chemical Engineering, 32 (2015) 980–992.
•Sirirat, T., Vatanatham, T., Hansupalak, N., Rempel, G.L., Arayapranee, W. “Kinetic study of styrene and methyl methacrylate emulsion polymerization induced by cumene hyeroxide/tetraethylenepentamine” Journal of Polymer Research, 22 (2015) 16 (11 pages). DOI 10.1007/s10965-014-0643-9.
•Junoi, S., Chisti, Y., Hansupalak, N. “Optimal conditions for deproteinizing natural rubber using immobilized alkaline protease”Journal of Chemical Technology & Biotechnology, 90 (2015), 185–193.
•Phatharachindanuwong, C., Hansupalak, N., Chareonpanich, M., Chisti, Y., Limtrakul, J., Plank, J. “Morphology and adsorption capacity of sodium silicate-based hierarchical porous silica template on natural rubber: Influence of washing–drying methods” Materials Letters, 130 (2014) 206–209.
•Prasertkittikul, S., Chisti, Y., Hansupalak, N. “Deproteinization of natural rubber using protease immobilized on epichlorohydrin crosslinked chitosan beads” Industrial & Engineering Chemistry Research, 52 (2013) 11723-11731.
•Songsing, K., Vatanatham, T., Hansupalak, N. “Kinetics and Mechanism of Grafting Styrene onto Natural Rubber in Emulsion Polymerization using Cumene Hyeroxide–Tetraethylenepentamine as Redox Initiator” European Polymer Journal, 49 (2013) 1007–1016.
•Aroonsingkarat, K., Hansupalak, N. “Prediction of Styrene Conversion of Polystyrene/Natural Rubber Graft Copolymerization Using Reaction Conditions: Central Composite Design vs. Artificial Neural Networks” Journal of Applied Polymer Science, 128 (2013) 2283–2290.
•Sresungsuwan, N., Hansupalak, N. “Prediction of Mechanical Properties of Compatibilized Styrene/Natural-Rubber Blend by Using Reaction Conditions: Central Composite Design vs. Artificial Neural Networks” Journal of Applied Polymer Science, 127 (2013) 356–365.
•Srithong, S., Jiraratananon, R., Hansupalak, N. “A Simple Postsulfonation of Poly(arylene ether sulfone) Radel R” Journal of Applied Polymer Science, 119 (2011) 973–976.
•Phompan, W., Hansupalak, N. “Improvement of proton-exchange membrane fuel cell performance using platinum-loaded carbon black entrapped in crosslinked chitosan” Journal of Power Sources, 196 (2011) 147–152.