張銀祐
國立虎尾科技大學 ｜ 教授
論文著作
Papers
期刊論文
1. Yin-Yu Chang*, Bao-Yu Chang, Chi-Sheng Chen, “Effect of CrN addition on the mechanical and tribological performances of multilayered AlTiN/CrN/ZrN hard coatings”, Surface & Coatings Technology 433(2022) 128107, 13 pages. Publication date: 2022/1/14. (SCI). MOST 108-2221-E-150 -020-MY3, MOST 110-2634-F-007-024. Impact factor= 4.158; Rank= 40/160 (Q1) in Physics, Applied - SCIE.
2. Yin-Yu Chang*, Cheng-Hsi Chung, Zong-Hong Tsai, Jun-Ming Tsai, “Tribological and Mechanical properties of AlCrBN hard coating deposited using cathodic arc evaporation”, Surface & Coatings Technology 432(2022) 128097, 14 pages. Publication date: 2022/1/10. (SCI). MOST 108-2221-E-150 -020-MY3, MOST 110-2634-F-007-024. Impact factor= 4.158; Rank= 40/160 (Q1) in Physics, Applied - SCIE.
3. Bo-Wei Lai, Yin-Yu Chang, Tzong-Ming Shieh, Heng-Li Huang, “Biocompatibility and Microstructure-Based Stress Analyses of TiNbZrTa Composite Films”, Materials 15(1)(2022), 29, 17 pages, Publication date: 2021/12/21. (SCI). Impact factor= 3.263; Rank= 17/80 (Q1) in Metallurgy & Metallurgical Engineering.
4. Yin-Yu Chang*, Liang-Chan Chao, “Effect of Substrate Bias Voltage on the Mechanical Properties of AlTiN/CrTiSiN Multilayer Hard Coatings”, Vacuum 190(2021) 110241, 11 pages. Publication date: 2021/5/1. (SCI). MOST 108-2221-E-150-020-MY3 and MOST 109-2634-F-007-024. Impact factor= 2.906; Rank= 55/155 (Q2) in Physics, Applied.
5. Yin-Yu Chang*, Cheng-Hsi Chung, “Tribological and Mechanical Properties of Multicomponent CrVTiNbZr(N) Coatings”, Coatings 11(2021) 41, 16 pages. Publication date: 2021/1/2. (SCI). MOST 108-2221-E-150-020-MY3 and MOST 109-2634-F-007-024. Impact factor= 2.436; Rank= 10/21(Q2) in Materials science, coatings & films.
6. Yin-Yu Chang*, Chih-Cheng Chuang, “Deposition of Multicomponent AlTiCrMoN Protective Coatings for Metal Cutting Applications”, Coatings 10(2020) 605, 18 pages. Publication date: 2020/6/28. (SCI). MOST 108-2221-E-150-020-MY3 and MOST 109-2634-F-007-024. Impact factor= 2.436; Rank= 10/21(Q2) in Materials science, coatings & films.
7. Heng-Li Huang, Ming-Tzu Tsai, Yin-Yu Chang*, Yi-Jyun Lin, Jui-Ting Hsu, “Fabrication of a Novel Ta(Zn)O Thin Film on Titanium by Magnetron Sputtering and Plasma Electrolytic Oxidation for Cell Biocompatibilities and Antibacterial Applications”, Metals 10(2020) 649, 17 pages. Publication date: 2020/5/18. (SCI). MOST 107-2218-E-131 -001 and MOST 108-2221-E-150-020-MY3. Impact factor= 2.117; Rank= 18/79 (Q1) in Metallurgy & Metallurgical Engineering.
8. Yin-Yu Chang*,Yu-Ju Yang, Shi -Yao Weng, “Effect of Interlayer Design on the Mechanical Properties of AlTiCrN and Multilayered AlTiCrN/TiSiN Hard Coatings”, Surface & Coatings Technology 389(2020) 125637, 11 pages. Publication date: 2020/5/20. (SCI). MOST 108-2221-E-150 -020-MY3, MOST 108-3017-F-007-002. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.
9. Heng-Li Huang, Ming-Tzu Tsai, Yi-Jou Lin, Yin-Yu Chang*, “Antibacterial and biological characteristics of tantalum oxide coated titanium pretreated by plasma electrolytic oxidation“, Thin Solid Films 688(2019) 137268, 9 pages. Publication date: 2019/10/31. (SCI). MOST 108-3017-F-007-002, MOST 107-2221-E-039-007 and MOST 107-2221-E-150 -003. Impact factor= 2.030; Rank= 81/155 (Q3) in Physics, applied Science.
10. Yin-Yu Chang*, Meng-Chun Cai,“Mechanical property and tribological performance of AlTiSiN and AlTiBN hard coatings using ternary alloy targets“, Surface & Coatings Technology 374(2019) 1120-1127. Publication date: 2019/09/25. (SCI). MOST 106-2221-E-150-011. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.
11. Yin-Yu Chang*, Siddhant Amrutwar, “Effect of Plasma Nitriding Pretreatment on the Mechanical Properties of AlCrSiN Coated Tool Steels”, Materials 12(2019) 795, 14 pages. Publication date: 2019/03/07. MOST 107-2218-E-131 -001 and MOST 107-2221-E-150 -003. Impact factor= 3.057; Rank= 132/314 (Q2) in Materials science, multidisciplinary.
12. Yin-Yu Chang, Jia-Hao Zhang, Heng-Li Huang*, “Effects of laser texture oxidation and high-temperature annealing of Ti-V alloy thin films on mechanical and antibacterial properties and cytotoxicity”, Materials 11(2018) 2495, 15 pages. Publication date: 2018/12/08. MOST 107-2221-E-150-003 and MOST 107-2221-E-039-007 and MOST 107-2218-E-131-001. Impact factor= 3.057; Rank= 132/314 (Q2) in Materials science, multidisciplinary.
13. Yin-Yu Chang, Hung Chang, Liang-Jhan Jhao, Chih-Cheng Chuang, “Tribological and mechanical properties of multilayered TiVN/TiSiN coatings synthesized by cathodic arc evaporation”, Surface & Coatings Technology 350(2018) 1071-1079. Publication date: 2018/09/25. (SCI). MOST 106-2221-E-150-011. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.
14. T.S. Yang, S.H. Yao*, Y.Y. Chang, J.H. Deng, “Contact Behavior of Composite CrTiSiN Coated Dies in Compressing of Mg Alloy Sheets under High Pressure“, Materials 11(2018) 88, 11 pages. Publication date: 2018/01/8. (SCI). Impact factor= 3.057; Rank= 132/314 (Q2) in Materials science, multidisciplinary.
15. Yin-Yu Chang*, Shi-Yao Weng, Chun-Hsiao Chen, Fu-Xing Fu,“High Temperature Oxidation and Cutting Performance of AlCrN, TiVN and Multilayered AlCrN/TiVN Hard Coatings“, Surface & Coatings Technology 332(2017) 494-503. Publication date: 2017/12/25, (SCI). MOST 103-2622-E-150 -011 -CC3 and MOST 105-2221-E-150 -003. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.
16. Sheng-Min Yang, Yung-Ting Huang, Yin-Yu Chang, Yeong-Tsuen Pan, Dong-Yih Lin, “Oxidation resistance of Cr2N and (Cr,W)2N coatings deposited on ferritic stainless steel”, Surface & Coatings Technology 325 (2017) 7–13. Publication date: 2017/06/15. (SCI). MOST 104-2218-E-390-001. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.
17. Ming-Tzu Tsai, Yin-Yu Chang*, Heng-Li Huang, Yu-Hsuan Wu, Tzong-Ming Shieh, “Micro-arc oxidation treatment enhanced the biological performance of human osteosarcoma cell line and human skin fibroblasts cultured on titanium–zirconium films”, Surface & Coatings Technology 303A (2016) 268–276. Publication date: 2016/10/15. (SCI). MOST 104-2314-B-039-043, MOST 104-2221-E-150-003, and MOST 103-2320-B-241-003. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.
18. Yin-Yu Chang*, Wen-Tung Chiu, Jui-Pin Hung,“Mechanical properties and high temperature oxidation of CrAlSiN/TiVN hard coatings synthesized by cathodic arc evaporation“, Surface & Coatings Technology 303A (2016) 18-24. Publication date: 2016/10/15. (SCI). MOST 104-2314-B-039-043, MOST 104-2221-E-150-003, and MOST 103-2320-B-241-003. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.
19. Heng-Li Huang, Yin-Yu Chang*, Jia-Xu Liu, Ming-Tzu Tsai, Chih-Ho Lai, “Antibacterial Activity and Cell Compatibility of TiZrN, TiZrCN, and TiZr-amorphous Carbon Coatings”, Thin Solid Films, 596(2015)111-117. Publication date: 2015/12/21. (SCI). NSC 102-2221-E-150-006 and MOST 104-2221-E-150-003. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
20. K. Bobzin, T. Brögelmann, R.H. Brugnara, M. Arghavani, T.S. Yang, Y.Y. Chang, S.Y. Chang, “Investigation on plastic behavior of HPPMS CrN, AlN and CrN/AlN-multilayer coatings using finite element simulation and nanoindentation”, Surface & Coatings Technology 284 (2015) 310–317. Publication date: 2015/08/20. (SCI). Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
21. Yin-Yu Chang*, Heng-Li Huang, Hung-Jui Chen, Chih-Ho Lai, Chi-Yuan Wen, “Antibacterial Properties and Cytocompatibility of Tantalum Oxide Coatings”, Surface & Coatings Technology, 259B(2014)193–198. Publication date: 2014/11/25. (SCI). NSC 102-2221-E-150-006 and NSC 101-2314-B-039-022-MY3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
22. Yin-Yu Chang, Heng-Li Huang, Ya-Chi Chen, Jui-Ting Hsu, Tzong-Ming Shieh, Ming-Tzu Tsai*, “Biological Characteristics of the MG-63 Human Osteosarcoma Cells on Composite Tantalum Carbide/Amorphous Carbon Films”, PLOS ONE, 9(4):e95590. Publication date: 2014/4/23. (SCI). NSC 101-2221-E-150-032. Impact factor= 2.740; Rank= 27/71 in Multidisciplinary Sciences.
23. Ming-Tzu Tsai, Yin-Yu Chang*, Heng-Li Huang, Ya-Chi Chen, Shun-Ping Wang, Chih-Ho Lai, “Biological Characteristics of Human Fetal Skin Fibroblasts and MG-63 Human Osteosarcoma Cells on Tantalum-doped Carbon Films”, Surface & Coatings Technology, 245(2014)16-21. Publication date: 2014/4/28. (SCI). NSC 102-2221-E-150-006, NSC 101-2314-B-039-022-MY3, TCVGH-HK1008008, and TCVGH-HK1028002. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
24. Yin-Yu Chang*, Hsing-Ming Lai, “Wear behavior and cutting performance of CrAlSiN and TiAlSiN hard coatings on cemented carbide cutting tools for Ti alloys”, Surface & Coatings Technology, 259(2014)152–158. Publication date: 2014/2/15. (SCI). NSC 102-2622-E-150-001 and NSC 102-2221-E-150-005-MY2. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
25. Heng-Li Huang, Yin-Yu Chang*, Hung-Jui Chen, Yu-Kai Chou, Chih-Ho Lai, Michael YC Chen, “Antibacterial Properties and Cytocompatibility of Tantalum Oxide Coatings with Different Silver Contents”, Journal of Vacuum Science & Technology A (JVST A), 32(2014) 02B117-1~6. Publication date: 2014/2/6. (SCI). NSC 101-2221-E-150-032 and NSC 101-2622-E-150-001. Impact factor= 2.140; Rank= 5/18 in Materials science, coatings & films.
26. Yin-Yu Chang*, Hsing-Ming Lai, Ho-Yi Kao, “High temperature wettability of ion implanted multicomponent CrAlSiN films by molten glass”, Surface & Coatings Technology, 237(2013)164-169. Publication date: 2013/12/25. (SCI). NSC 101-2221-E-150 -032 and NSC 101-2622-E-150 -015-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
27. Heng-Li Huang, Yin-Yu Chang*, Ya-Chi Chen, Chih-Ho Lai, Michael YC Chen, “Cytocompatibility and Antibacterial Properties of Zirconia Coatings with Different Silver Contents on Titanium”, Thin Solid Films, 549 (2013) 108-116. Publication date: 2013/12/31. (SCI). NSC 101-2221-E-150-032 and NSC 101-2314-B-039-022-MY3. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
28. Yin-Yu Chang*, Heng-Li Huang, Ya-Chi Chen, Jui-Ching Weng, Chih-Ho Lai, “Characterization and antibacterial performance of ZrNO-Ag coatings”, Surface & Coatings Technology, 231(2013)224-228. Publication date: 2013/09/25. (SCI). NSC 99-2622-E-451-004-CC3 and NSC 100-2221-E-150 -095. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
29. Yin-Yu Chang*, Chih-Ming Cheng, Yau-Yi Liou, Wolfgang Tillmann, Fabian Hoffmann, Tobias Sprute, “High temperature wettability of multicomponent CrAlSiN and TiAlSiN coatings by molten glass”, Surface & Coatings Technology, 231(2013)24-28. Publication date: 2013/09/25. (SCI). NSC 99-2221-E-451 -005 / NSC 100-2221-E-150 -095. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
30. Yin-Yu Chang*, Chen-Jui Wu, “Mechanical properties and impact resistance of multilayered TiAlN/ZrN coatings”, Surface & Coatings Technology, 231(2013)62-66. Publication date: 2013/09/25. (SCI). NSC 100-2221-E-150 -095 / NSC 100-2622-E-150 -016 -CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
31. Wolfgang Tillmann, Tobias Sprute, Fabian Hoffmann, Yin-Yu Chang, Ching-Yu Tsai, “Influence of Bias Voltage on Residual Stresses and Tribological Properties of TiAlVN-Coatings at Elevated Temperatures”, Surface & Coatings Technology, 231(2013)122-125. Publication date: 2013/09/25. (SCI). NSC 100-2911-I-451-503 (DAAD/NSC PPP Program). Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
32. Yin-Yu Chang, Heng-Li Huang*, Jui-Ting Hsu, Chih-Ho Lai, Tzong-Ming Shieh, Aaron Yu-Jen Wu, Chao-Ling Chen, “Analyses of antibacterial activity and cell compatibilty of titanium coated with a Zr-C-N film”, PLOS ONE, 8 (2013) e56771(6 pages). Publication date: 2013/02/19. (SCI). NSC 101-2314-B-039-022-MY3. Impact factor= 2.740; Rank= 27/71 in Multidisciplinary Sciences.
33. Heng-Li Huang, Yin-Yu Chang*, Jui-Ching Weng, Ya-Chi Chen, Chih-Ho Lai, Tzong-Ming Shieh, “Anti-bacterial Performance of Zirconia Coatings on Titanium Implants”, Thin Solid Films, 528 (2013) 151-156. Publication date: 2013/01/15. (SCI). NSC 99-2622-E-451-004-CC3 / NSC 100-2221-E-150-095, Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
34. Ming-Tzu Tsai, Yin-Yu Chang*, Heng-Li Huang, Jui-Ting Hsu, Ya-Chi Chen, Aaron Yu-Jen Wu, “Characterization and antibacterial performance of bioactive Ti-Zn-O coatings deposited on titanium implants”, Thin Solid Films, 528 (2013) 143-150. Publication date: 2013/01/15. (SCI). NSC 99-2622-E-451-004-CC3 / NSC 100-2221-E-150-095, Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
35. Yin-Yu Chang, Tung-Sheng Yang, Sheng-Yi Chang, “Microstructural and Mechanical Properties of Single-Layered and Multilayered on H13 Tool Steels by a Cathodic Arc Deposition Process”, Advanced Science Letters, 8 (2012) 845-850. Publication date: 2012/04/15. (SCI). Impact factor= 1.253; Rank= 15/59 in Multidisciplinary sciences.
36. Shui-Yang Lien, Yu-Cheng Chang, Yun-Shao Cho, Yin-Yu Chang, and Shuo-Jen Lee, “Deposition and Characterization of High-Efficiency Silicon Thin-Film Solar Cells by HF-PECVD and OES Technology”, IEEE s on Electron Devices, 59 (2012) 1245-1254. Publication date: 2012/05. Impact factor= 2.358; Rank= 44/248 in Engineering, electrical & electronic.
37. Yin-Yu Chang, Chih-Ho Lai, Jui-Ting Hsu, Chih-Hsin Tang, Wan-Chuen Liao, Heng-Li Huang, “Antibacterial properties and human gingival fibroblast cell compatibility of TiO2/Ag compound coatings and ZnO films on titanium-based material”, Clinical Oral Investigations, 16 (2012) 95-100. (SCI). Impact factor= 3.723; Rank= 15/91 in Dentistry, oral surgery & medicine. Publication date: 2012/02.
38. Chih-Ho Lai, Yin-Yu Chang*, Heng-Li Huang, Ho-Yi Kao, “Characterization and antibacterial performance of ZrCN/amorphous carbon coatings deposited on titanium implants”, Thin Solid Films, 520 (2011) 1525-1531. (SCI). NSC 99-2622-E-451-004-CC3 / NSC 99-2221-E-451-005. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science. Publication date: 2011/12.
39. Chein-Hung Yu, Heng-Li Huang, Li-Chun Wu, Jui-Ting Hsu, Yin-Yu Chang, Her-Hsiung Huang, Ming-Tzu Tsai, “Friction of stainless steel, nickel-titanium alloy, and beta-titanium alloy archwires in two commonly used orthodontic brackets”, Journal of Mechanics in Medicine and Biology, 11(4)(2011)917-928. (SCI). Impact factor= 0.493; Rank= 59/70 in Engineering, biomedical. Publication date: 2011/09.
40. Jian-Hong Yu, Li-Chun Wu, Jui-Ting Hsu, Yin-Yu Chang, Her-Hsiung Huang, Heng-Li Huang, “Surface Roughnesses and Tomographies of Four Commonly Used Orthodontic Archwires”, Journal of Medical and Biological Engineering, 31(5)(2011)367-370. (SCI). Impact factor= 1.173; Rank= 73/87 in Engineering, biomedical. Publication date: 2011/11.
------------------------------------------------------------------------------------------------------------------------
41. Yin-Yu Chang*, Chi-Pang Chang, Ho-Yi Kao, “High temperature oxidation resistance of multilayered AlxTi1-xN/CrN coatings”, Thin Solid Films, 519 (2011) 6716-6720. (SCI). NSC 98-2221-E-451-006. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
42. Yin-Yu Chang*, Yaw-Nan Shieh, Ho-Yi Kao, “Optical properties of TiO2 thin films after Ag ion implantation”, Thin Solid Films, 519 (2011) 6935-6939. (SCI). NSC 99-2221-E-451-005. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
43. Heng-Li Huang, Yin-Yu Chang, Dan-Jae Lin, Yu-Fen Li, Kuan-Ting Chen, Jui-Ting Hsu, “Bone strain and initial stability uation of an immediately loaded dental implant on various bone quality and quantity: an in vitro study”, Clinical Oral Implants Research, 22 (2011) 691-698. (SCI). Impact factor= 3.723; Rank= 8/91 in Dentistry, oral surgery & medicine.
44. Shui-Yang Lien, Yin-Yu Chang, Jui-Hao Wang, Ko-Wei Weng, Ching-Hsun Chao, Chia-Fu Chen, “Characterization of HF-PECVD a-Si:H thin film solar cells using by OES studies”, Journal of Non-Crystalline Solids, 357 (2011)161-164. (SCI). NSC 98-2221-E-451-003 / 98-2622-E-451-001-CC3. Impact factor= 2.292; Rank= 4/28 in Materials science, ceramics.
45. P.Vijai Bharathy, Yin-Yu Chang, D.Nataraj, Q.Yang, Sheng-Min Yang, D.Mangalaraj, Lei Yang, Thomas J. Webster, “Effect of nickel incorporation on structural, nanomechanical and biocompatible properties of amorphous hydrogenated carbon thin films prepared by low energy biased target ion beam deposition”, Thin Solid Films, 519 (2010) 1623-1628. (SCI). Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
46. Heng-Li Huang, Yin-Yu Chang*, Meng-Cheng Lai, Cai-Rong Lin, Chih-Ho Lai, Tzong-Ming Shieh, “Antibacterial TaN-Ag Coatings on Titanium Dental Implants”, Surface & Coatings Technology, 205 (2010) 1636-1641. (SCI). NSC 99-2622-E-451-004-CC3 / NSC 98-2221-E-451-006. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
47. Yaw-Nan Shieh, Yin-Yu Chang*, “Influence of cobalt ion implantation on optical properties of titanium dioxide thin films”, Thin Solid Films, 518 (2010) 7464-7467. (SCI). Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
48. Yin-Yu Chang*, Sheng-Min Yang, “High Temperature oxidation behavior of multicomponent TiAlSiN coatings”, Thin Solid Films, 518 (2010) 534-537. (SCI) NSC 98-2221-E-451-006. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
49. Yin-Yu Chang*, Chi-Pang Chang, “High Temperature Stability of Multicomponent TiAlSiN and CrAlSiN Coatings”, Journal of Nanoscience and Nanotechnology, 10 (2010) 4762-4766. (SCI) NSC 98-2221-E-451-006. Impact factor= 1.134; Rank= 137/177 in Chemistry, Multidisciplinary.
50. Yin-Yu Chang*, Chi-Pang Chang, “Microstructural and mechanical properties of graded and multilayered AlxTi1-xN/CrN coatings synthesized by a cathodic-arc deposition process”, Surface & Coatings Technology, 204 (2009) 1030-1034. (SCI) NSC 97-2221-E-451-005. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
51. Yin-Yu Chang*, Chia-Yuan Hsiao, “High temperature oxidation resistance of multicomponent Cr-Ti-Al-Si-N coatings”, Surface & Coatings Technology, 204 (2009) 992-996. (SCI) NSC 97-2221-E-451-005. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
52. Yin-Yu Chang*, Shun-Jan Yang, Weite Wu, Yu-Chu Kuo, Jyh-Wei Lee, Chaur-Jeng Wang, “Mechanical properties of gradient and multilayered TiAlSiN hard coatings”, Thin Solid Films, 517/17 (2009) 4934-4937. (SCI) NSC 97-2221-E-451-005. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
53. C.C. Tseng, J.H. Hsieh, S.C. Jang, Y.Y. Chang, W. Wu, “Microstructural analysis and mechanical properties of TaN–Ag nanocomposite thin films”, Thin Solid Films, 517/17 (2009) 4970-4974. (SCI) Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
54. Yin-Yu Chang*, Shun-Jan Yang, Weite Wu, “Plasma analyses and structural properties of Cr-N-C-O coatings synthesized by a cathodic arc evaporation process”, Thin Solid Films, 517/14 (2009) 4240-4243. (SCI) NSC 95-2622-E-451-002-CC3. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
55. S.M. Yang, Y.Y. Chang, D.Y. Lin, D.Y. Wang, W. Wu, “Thermal stability of TiAlN and nanocomposite TiAlSiN thin films”, Journal of Nanoscience and Nanotechnology, 9 (2009) 1108-1112. (SCI) NSC-95-2221-E-451-002. Impact factor= 1.134; Rank= 137/177 in Chemistry, Multidisciplinary.
56. Yin-Yu Chang*, Chi-Pang Chang, Da-Yung Wang, Sheng-Min Yang, Weite Wu, “ High temperature oxidation resistance of Cr-Al-Si-N coatings synthesized by a cathodic-arc deposition process”, Journal of Alloys and Compounds, 461 (2008) 336-341. (SCI) NSC-95-2221-E-451-002. Impact factor= 4.650; Rank= 8/79 in Metallurgy & metallurgical engineering.
57. Sheng-Min Yang, Yin-Yu Chang, Dong-Yih Lin, Da-Yung Wang, Weite Wu, “Mechanical and tribological properties of multilayered TiSiN/CrN coatings synthesized by a cathodic arc deposition process”, Surface & Coatings Technology, 202 (2008) 2176-2181. (SCI) NSC-95-2221-E-451-002. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
58. S.M. Yang, Y.Y. Chang, D.Y. Lin, D.Y. Wang, W. Wu, “Microstructure characterization of multilayered TiSiN/CrN thin films”, Journal of Nanoscience and Nanotechnology 8 (2008) 2688–2692. (SCI) NSC-95-2221-E-451-002. Impact factor= 1.134; Rank= 137/177 in Chemistry, Multidisciplinary.
59. Yin-Yu Chang*, Shun-Jan Yang, Yu-Hsien Liu, Da-Yung Wang, “ Plasma properties of CrOx Films Synthesized by a Cathodic Arc Evaporation Process”, Thin Solid Films, 516/16 (2008) 5536-5540. (SCI) NSC 94-2745-E-007-URD. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
60. Yin-Yu Chang, Shun-Jan Yang, Da-Yung Wang, “Structural and Mechanical Properties of Cr-C-O Thin Films Synthesized by a Cathodic Arc Deposition Process”, Surface & Coatings Technology 220 (2007) 941-945. (SCI) NSC 95-2622-E-451-002-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
61. Sheng-Min Yang, Yin-Yu Chang, Da-Yung Wang, Dong-Yih Lin, WeiTe Wu, “Mechanical properties of nano-structured Ti-Si-N films syntheized by cathodic arc evaporation”, Journal of Alloys and Compounds, 440(2007) 375-379. (SCI) NSC-95-2221-E-451-002. Impact factor= 4.650; Rank= 8/79 in Metallurgy & metallurgical engineering.
62. Yin-Yu Chang, Da-Yung Wang, “Characterization of nanocrystalline AlTiN coatings synthesized by a cathodic-arc deposition process”, Surface & Coatings Technology, 201 (2007) 6699-6701. (SCI) NSC-94-2622-E-451-002-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
63. Yin-Yu Chang, Shun-Jan Yang, Da-Yung Wang, “Characterization of TiCr(C,N)/amorphous carbon coatings synthesized by a cathodic-arc deposition process”, Thin Solid Films 515 (2007) 4722-4726. (SCI) NSC-94-2218-E-451-005. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
64. Ming-che Chen, Che-wei Kuo, Chia-ming Chang, Chih-chun Hsieh, Yin-Yu Chang, Weite Wu, “Diffusion and formation of intermetallic compounds during accumulative roll-bonding of Al/Mg alloys”, Materials s 48 (2007) 2595 – 2598. (SCI) Impact factor= 0.787; Rank= 22/76 in Metallurgy & metallurgical engineering.
65. Yin-Yu Chang, Shun-Jan Yang, Da-Yung Wang, “Structural and mechanical properties of AlxTi1-xN/CrN coatings synthesized by a cathodic-arc deposition process”, Surface & Coatings Technology, 201 (2006) 4209-4214. (SCI) NSC-94-2622-E-451-002-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
66. Yin-Yu Chang, Da-Yung Wang, Chi-Yung Hung, “Mechanical properties of TiAlN/CrN nanolayered coatings synthesized by a cathodic-arc deposition process”, Solid State Phenomena 118 (2006) 323-327. (EI) NSC-94-2622-E-451-002-CC3.
67. Yin-Yu Chang, Da-Yung Wang, “Structural and electrical properties of Cr doped a-C:H films synthesized by a cathodic-arc activated deposition process”, Surface & Coatings Technology, 200(2006) 3170-3174. (SCI) NSC92-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
68. 汪大永､張銀祐､洪志穎, “陰極電弧沈積氮化鋁鈦/氮化鉻奈米多層薄膜之開發與應用”, 科學與工程技術,第一卷第二期(2005/09),pp.1-6｡ISBN/1816-6563.
69. 汪大永, 張銀祐, “陰極電弧沈積氮化鉻鋁鈦薄膜之開發與應用”, 陶業季刊, 第二十四卷, 第三期(2005)1-12. ISBN/ 1012-5442.
70. Yin-Yu Chang, Da-Yung Wang, C.Y. Hung, “Structural and Mechanical Properties of Nanolayered TiAlN/CrN Coatings Synthesized by a Cathodic-Arc Deposition Process”, Surface & Coatings Technology, 200 (2005) 1702-1708. (SCI) NSC93-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
71. Da-Yung Wang, Yin-Yu Chang, Yu-Wei Huang, “Deposition of diamond-like carbon films containing metal elements on biomedical Ti alloys”, Surface & Coatings Technology, 200(2005) 2175-2180. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
72. Yin-Yu Chang, Da-Yung Wang, “Corrosion behavior of electroless nickel enhanced by titanium ion implantation”, Surface & Coatings Technology, 200(2005) 2187-2191. (SCI) NSC92-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
73. Yin-Yu Chang, Da-Yung Wang, “Structural and electrical properties of nitrogen-doped a-C:H films synthesized by a cathodic-arc activated deposition process”, Thin Solid Films, 485(2005)1-7. (SCI) NSC92-2622-E-451-001-CC3. Impact factor= 2.030; Rank= 9/19 in Materials science, coatings & films.
74. Yin-Yu Chang, Da-Yung Wang, “Corrosion behavior of CrN coatings enhanced by niobium ion implantation”, Surface & Coatings Technology, 188-189C (2004) 478-483. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
75. Yin-Yu Chang, Da-Yung Wang, Chi-How Chang, WeiTe Wu, “Tribological analysis of nano-composite diamond-like carbon films deposited by unbalanced magnetron sputtering”, Surface & Coatings Technology, 184 (2004) 349-355. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
76. Yin-Yu Chang, Da-Yung Wang, WeiTe Wu, “Tribological Enhancement of CrN Coatings by Niobium and Carbon ion implantation”, Surface & Coatings Technology, 177-178C (2004) 441-446. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
77. Yin-Yu Chang, Da-Yung Wang, WeiTe Wu, “Characterization of Nitrogen-doped a-C:H Films Deposited by Cathodic-arc Activated Deposition Process”, Diamond & Related Materials, 12/10-11 (2003) 2077-2082. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 1.709; Rank= 70/225 in Materials science, multidisciplinary.
78. Yin-Yu Chang, Da-Yung Wang, WeiTe Wu, ”Catalysis effect of metal doping on Wear Properties of Diamond-like Carbon Films deposited by Cathodic-arc Activated Deposition Process”, Thin Solid Films 420–421 (2002) 241–247. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 2.030; Rank= 9/19 in Materials science, coatings & films.
1. Yin-Yu Chang*, Bao-Yu Chang, Chi-Sheng Chen, “Effect of CrN addition on the mechanical and tribological performances of multilayered AlTiN/CrN/ZrN hard coatings”, Surface & Coatings Technology 433(2022) 128107, 13 pages. Publication date: 2022/1/14. (SCI). MOST 108-2221-E-150 -020-MY3, MOST 110-2634-F-007-024. Impact factor= 4.158; Rank= 40/160 (Q1) in Physics, Applied - SCIE.
2. Yin-Yu Chang*, Cheng-Hsi Chung, Zong-Hong Tsai, Jun-Ming Tsai, “Tribological and Mechanical properties of AlCrBN hard coating deposited using cathodic arc evaporation”, Surface & Coatings Technology 432(2022) 128097, 14 pages. Publication date: 2022/1/10. (SCI). MOST 108-2221-E-150 -020-MY3, MOST 110-2634-F-007-024. Impact factor= 4.158; Rank= 40/160 (Q1) in Physics, Applied - SCIE.
3. Bo-Wei Lai, Yin-Yu Chang, Tzong-Ming Shieh, Heng-Li Huang, “Biocompatibility and Microstructure-Based Stress Analyses of TiNbZrTa Composite Films”, Materials 15(1)(2022), 29, 17 pages, Publication date: 2021/12/21. (SCI). Impact factor= 3.263; Rank= 17/80 (Q1) in Metallurgy & Metallurgical Engineering.
4. Yin-Yu Chang*, Liang-Chan Chao, “Effect of Substrate Bias Voltage on the Mechanical Properties of AlTiN/CrTiSiN Multilayer Hard Coatings”, Vacuum 190(2021) 110241, 11 pages. Publication date: 2021/5/1. (SCI). MOST 108-2221-E-150-020-MY3 and MOST 109-2634-F-007-024. Impact factor= 2.906; Rank= 55/155 (Q2) in Physics, Applied.
5. Yin-Yu Chang*, Cheng-Hsi Chung, “Tribological and Mechanical Properties of Multicomponent CrVTiNbZr(N) Coatings”, Coatings 11(2021) 41, 16 pages. Publication date: 2021/1/2. (SCI). MOST 108-2221-E-150-020-MY3 and MOST 109-2634-F-007-024. Impact factor= 2.436; Rank= 10/21(Q2) in Materials science, coatings & films.
6. Yin-Yu Chang*, Chih-Cheng Chuang, “Deposition of Multicomponent AlTiCrMoN Protective Coatings for Metal Cutting Applications”, Coatings 10(2020) 605, 18 pages. Publication date: 2020/6/28. (SCI). MOST 108-2221-E-150-020-MY3 and MOST 109-2634-F-007-024. Impact factor= 2.436; Rank= 10/21(Q2) in Materials science, coatings & films.
7. Heng-Li Huang, Ming-Tzu Tsai, Yin-Yu Chang*, Yi-Jyun Lin, Jui-Ting Hsu, “Fabrication of a Novel Ta(Zn)O Thin Film on Titanium by Magnetron Sputtering and Plasma Electrolytic Oxidation for Cell Biocompatibilities and Antibacterial Applications”, Metals 10(2020) 649, 17 pages. Publication date: 2020/5/18. (SCI). MOST 107-2218-E-131 -001 and MOST 108-2221-E-150-020-MY3. Impact factor= 2.117; Rank= 18/79 (Q1) in Metallurgy & Metallurgical Engineering.
8. Yin-Yu Chang*,Yu-Ju Yang, Shi -Yao Weng, “Effect of Interlayer Design on the Mechanical Properties of AlTiCrN and Multilayered AlTiCrN/TiSiN Hard Coatings”, Surface & Coatings Technology 389(2020) 125637, 11 pages. Publication date: 2020/5/20. (SCI). MOST 108-2221-E-150 -020-MY3, MOST 108-3017-F-007-002. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.
9. Heng-Li Huang, Ming-Tzu Tsai, Yi-Jou Lin, Yin-Yu Chang*, “Antibacterial and biological characteristics of tantalum oxide coated titanium pretreated by plasma electrolytic oxidation“, Thin Solid Films 688(2019) 137268, 9 pages. Publication date: 2019/10/31. (SCI). MOST 108-3017-F-007-002, MOST 107-2221-E-039-007 and MOST 107-2221-E-150 -003. Impact factor= 2.030; Rank= 81/155 (Q3) in Physics, applied Science.
10. Yin-Yu Chang*, Meng-Chun Cai,“Mechanical property and tribological performance of AlTiSiN and AlTiBN hard coatings using ternary alloy targets“, Surface & Coatings Technology 374(2019) 1120-1127. Publication date: 2019/09/25. (SCI). MOST 106-2221-E-150-011. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.
11. Yin-Yu Chang*, Siddhant Amrutwar, “Effect of Plasma Nitriding Pretreatment on the Mechanical Properties of AlCrSiN Coated Tool Steels”, Materials 12(2019) 795, 14 pages. Publication date: 2019/03/07. MOST 107-2218-E-131 -001 and MOST 107-2221-E-150 -003. Impact factor= 3.057; Rank= 132/314 (Q2) in Materials science, multidisciplinary.
12. Yin-Yu Chang, Jia-Hao Zhang, Heng-Li Huang*, “Effects of laser texture oxidation and high-temperature annealing of Ti-V alloy thin films on mechanical and antibacterial properties and cytotoxicity”, Materials 11(2018) 2495, 15 pages. Publication date: 2018/12/08. MOST 107-2221-E-150-003 and MOST 107-2221-E-039-007 and MOST 107-2218-E-131-001. Impact factor= 3.057; Rank= 132/314 (Q2) in Materials science, multidisciplinary.
13. Yin-Yu Chang, Hung Chang, Liang-Jhan Jhao, Chih-Cheng Chuang, “Tribological and mechanical properties of multilayered TiVN/TiSiN coatings synthesized by cathodic arc evaporation”, Surface & Coatings Technology 350(2018) 1071-1079. Publication date: 2018/09/25. (SCI). MOST 106-2221-E-150-011. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.
14. T.S. Yang, S.H. Yao*, Y.Y. Chang, J.H. Deng, “Contact Behavior of Composite CrTiSiN Coated Dies in Compressing of Mg Alloy Sheets under High Pressure“, Materials 11(2018) 88, 11 pages. Publication date: 2018/01/8. (SCI). Impact factor= 3.057; Rank= 132/314 (Q2) in Materials science, multidisciplinary.
15. Yin-Yu Chang*, Shi-Yao Weng, Chun-Hsiao Chen, Fu-Xing Fu,“High Temperature Oxidation and Cutting Performance of AlCrN, TiVN and Multilayered AlCrN/TiVN Hard Coatings“, Surface & Coatings Technology 332(2017) 494-503. Publication date: 2017/12/25, (SCI). MOST 103-2622-E-150 -011 -CC3 and MOST 105-2221-E-150 -003. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.
16. Sheng-Min Yang, Yung-Ting Huang, Yin-Yu Chang, Yeong-Tsuen Pan, Dong-Yih Lin, “Oxidation resistance of Cr2N and (Cr,W)2N coatings deposited on ferritic stainless steel”, Surface & Coatings Technology 325 (2017) 7–13. Publication date: 2017/06/15. (SCI). MOST 104-2218-E-390-001. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.
17. Ming-Tzu Tsai, Yin-Yu Chang*, Heng-Li Huang, Yu-Hsuan Wu, Tzong-Ming Shieh, “Micro-arc oxidation treatment enhanced the biological performance of human osteosarcoma cell line and human skin fibroblasts cultured on titanium–zirconium films”, Surface & Coatings Technology 303A (2016) 268–276. Publication date: 2016/10/15. (SCI). MOST 104-2314-B-039-043, MOST 104-2221-E-150-003, and MOST 103-2320-B-241-003. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.
18. Yin-Yu Chang*, Wen-Tung Chiu, Jui-Pin Hung,“Mechanical properties and high temperature oxidation of CrAlSiN/TiVN hard coatings synthesized by cathodic arc evaporation“, Surface & Coatings Technology 303A (2016) 18-24. Publication date: 2016/10/15. (SCI). MOST 104-2314-B-039-043, MOST 104-2221-E-150-003, and MOST 103-2320-B-241-003. Impact factor= 3.784; Rank= 3/21 (Q1) in Materials science, coatings & films.
19. Heng-Li Huang, Yin-Yu Chang*, Jia-Xu Liu, Ming-Tzu Tsai, Chih-Ho Lai, “Antibacterial Activity and Cell Compatibility of TiZrN, TiZrCN, and TiZr-amorphous Carbon Coatings”, Thin Solid Films, 596(2015)111-117. Publication date: 2015/12/21. (SCI). NSC 102-2221-E-150-006 and MOST 104-2221-E-150-003. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
20. K. Bobzin, T. Brögelmann, R.H. Brugnara, M. Arghavani, T.S. Yang, Y.Y. Chang, S.Y. Chang, “Investigation on plastic behavior of HPPMS CrN, AlN and CrN/AlN-multilayer coatings using finite element simulation and nanoindentation”, Surface & Coatings Technology 284 (2015) 310–317. Publication date: 2015/08/20. (SCI). Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
21. Yin-Yu Chang*, Heng-Li Huang, Hung-Jui Chen, Chih-Ho Lai, Chi-Yuan Wen, “Antibacterial Properties and Cytocompatibility of Tantalum Oxide Coatings”, Surface & Coatings Technology, 259B(2014)193–198. Publication date: 2014/11/25. (SCI). NSC 102-2221-E-150-006 and NSC 101-2314-B-039-022-MY3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
22. Yin-Yu Chang, Heng-Li Huang, Ya-Chi Chen, Jui-Ting Hsu, Tzong-Ming Shieh, Ming-Tzu Tsai*, “Biological Characteristics of the MG-63 Human Osteosarcoma Cells on Composite Tantalum Carbide/Amorphous Carbon Films”, PLOS ONE, 9(4):e95590. Publication date: 2014/4/23. (SCI). NSC 101-2221-E-150-032. Impact factor= 2.740; Rank= 27/71 in Multidisciplinary Sciences.
23. Ming-Tzu Tsai, Yin-Yu Chang*, Heng-Li Huang, Ya-Chi Chen, Shun-Ping Wang, Chih-Ho Lai, “Biological Characteristics of Human Fetal Skin Fibroblasts and MG-63 Human Osteosarcoma Cells on Tantalum-doped Carbon Films”, Surface & Coatings Technology, 245(2014)16-21. Publication date: 2014/4/28. (SCI). NSC 102-2221-E-150-006, NSC 101-2314-B-039-022-MY3, TCVGH-HK1008008, and TCVGH-HK1028002. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
24. Yin-Yu Chang*, Hsing-Ming Lai, “Wear behavior and cutting performance of CrAlSiN and TiAlSiN hard coatings on cemented carbide cutting tools for Ti alloys”, Surface & Coatings Technology, 259(2014)152–158. Publication date: 2014/2/15. (SCI). NSC 102-2622-E-150-001 and NSC 102-2221-E-150-005-MY2. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
25. Heng-Li Huang, Yin-Yu Chang*, Hung-Jui Chen, Yu-Kai Chou, Chih-Ho Lai, Michael YC Chen, “Antibacterial Properties and Cytocompatibility of Tantalum Oxide Coatings with Different Silver Contents”, Journal of Vacuum Science & Technology A (JVST A), 32(2014) 02B117-1~6. Publication date: 2014/2/6. (SCI). NSC 101-2221-E-150-032 and NSC 101-2622-E-150-001. Impact factor= 2.140; Rank= 5/18 in Materials science, coatings & films.
26. Yin-Yu Chang*, Hsing-Ming Lai, Ho-Yi Kao, “High temperature wettability of ion implanted multicomponent CrAlSiN films by molten glass”, Surface & Coatings Technology, 237(2013)164-169. Publication date: 2013/12/25. (SCI). NSC 101-2221-E-150 -032 and NSC 101-2622-E-150 -015-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
27. Heng-Li Huang, Yin-Yu Chang*, Ya-Chi Chen, Chih-Ho Lai, Michael YC Chen, “Cytocompatibility and Antibacterial Properties of Zirconia Coatings with Different Silver Contents on Titanium”, Thin Solid Films, 549 (2013) 108-116. Publication date: 2013/12/31. (SCI). NSC 101-2221-E-150-032 and NSC 101-2314-B-039-022-MY3. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
28. Yin-Yu Chang*, Heng-Li Huang, Ya-Chi Chen, Jui-Ching Weng, Chih-Ho Lai, “Characterization and antibacterial performance of ZrNO-Ag coatings”, Surface & Coatings Technology, 231(2013)224-228. Publication date: 2013/09/25. (SCI). NSC 99-2622-E-451-004-CC3 and NSC 100-2221-E-150 -095. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
29. Yin-Yu Chang*, Chih-Ming Cheng, Yau-Yi Liou, Wolfgang Tillmann, Fabian Hoffmann, Tobias Sprute, “High temperature wettability of multicomponent CrAlSiN and TiAlSiN coatings by molten glass”, Surface & Coatings Technology, 231(2013)24-28. Publication date: 2013/09/25. (SCI). NSC 99-2221-E-451 -005 / NSC 100-2221-E-150 -095. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
30. Yin-Yu Chang*, Chen-Jui Wu, “Mechanical properties and impact resistance of multilayered TiAlN/ZrN coatings”, Surface & Coatings Technology, 231(2013)62-66. Publication date: 2013/09/25. (SCI). NSC 100-2221-E-150 -095 / NSC 100-2622-E-150 -016 -CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
31. Wolfgang Tillmann, Tobias Sprute, Fabian Hoffmann, Yin-Yu Chang, Ching-Yu Tsai, “Influence of Bias Voltage on Residual Stresses and Tribological Properties of TiAlVN-Coatings at Elevated Temperatures”, Surface & Coatings Technology, 231(2013)122-125. Publication date: 2013/09/25. (SCI). NSC 100-2911-I-451-503 (DAAD/NSC PPP Program). Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
32. Yin-Yu Chang, Heng-Li Huang*, Jui-Ting Hsu, Chih-Ho Lai, Tzong-Ming Shieh, Aaron Yu-Jen Wu, Chao-Ling Chen, “Analyses of antibacterial activity and cell compatibilty of titanium coated with a Zr-C-N film”, PLOS ONE, 8 (2013) e56771(6 pages). Publication date: 2013/02/19. (SCI). NSC 101-2314-B-039-022-MY3. Impact factor= 2.740; Rank= 27/71 in Multidisciplinary Sciences.
33. Heng-Li Huang, Yin-Yu Chang*, Jui-Ching Weng, Ya-Chi Chen, Chih-Ho Lai, Tzong-Ming Shieh, “Anti-bacterial Performance of Zirconia Coatings on Titanium Implants”, Thin Solid Films, 528 (2013) 151-156. Publication date: 2013/01/15. (SCI). NSC 99-2622-E-451-004-CC3 / NSC 100-2221-E-150-095, Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
34. Ming-Tzu Tsai, Yin-Yu Chang*, Heng-Li Huang, Jui-Ting Hsu, Ya-Chi Chen, Aaron Yu-Jen Wu, “Characterization and antibacterial performance of bioactive Ti-Zn-O coatings deposited on titanium implants”, Thin Solid Films, 528 (2013) 143-150. Publication date: 2013/01/15. (SCI). NSC 99-2622-E-451-004-CC3 / NSC 100-2221-E-150-095, Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
35. Yin-Yu Chang, Tung-Sheng Yang, Sheng-Yi Chang, “Microstructural and Mechanical Properties of Single-Layered and Multilayered on H13 Tool Steels by a Cathodic Arc Deposition Process”, Advanced Science Letters, 8 (2012) 845-850. Publication date: 2012/04/15. (SCI). Impact factor= 1.253; Rank= 15/59 in Multidisciplinary sciences.
36. Shui-Yang Lien, Yu-Cheng Chang, Yun-Shao Cho, Yin-Yu Chang, and Shuo-Jen Lee, “Deposition and Characterization of High-Efficiency Silicon Thin-Film Solar Cells by HF-PECVD and OES Technology”, IEEE s on Electron Devices, 59 (2012) 1245-1254. Publication date: 2012/05. Impact factor= 2.358; Rank= 44/248 in Engineering, electrical & electronic.
37. Yin-Yu Chang, Chih-Ho Lai, Jui-Ting Hsu, Chih-Hsin Tang, Wan-Chuen Liao, Heng-Li Huang, “Antibacterial properties and human gingival fibroblast cell compatibility of TiO2/Ag compound coatings and ZnO films on titanium-based material”, Clinical Oral Investigations, 16 (2012) 95-100. (SCI). Impact factor= 3.723; Rank= 15/91 in Dentistry, oral surgery & medicine. Publication date: 2012/02.
38. Chih-Ho Lai, Yin-Yu Chang*, Heng-Li Huang, Ho-Yi Kao, “Characterization and antibacterial performance of ZrCN/amorphous carbon coatings deposited on titanium implants”, Thin Solid Films, 520 (2011) 1525-1531. (SCI). NSC 99-2622-E-451-004-CC3 / NSC 99-2221-E-451-005. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science. Publication date: 2011/12.
39. Chein-Hung Yu, Heng-Li Huang, Li-Chun Wu, Jui-Ting Hsu, Yin-Yu Chang, Her-Hsiung Huang, Ming-Tzu Tsai, “Friction of stainless steel, nickel-titanium alloy, and beta-titanium alloy archwires in two commonly used orthodontic brackets”, Journal of Mechanics in Medicine and Biology, 11(4)(2011)917-928. (SCI). Impact factor= 0.493; Rank= 59/70 in Engineering, biomedical. Publication date: 2011/09.
40. Jian-Hong Yu, Li-Chun Wu, Jui-Ting Hsu, Yin-Yu Chang, Her-Hsiung Huang, Heng-Li Huang, “Surface Roughnesses and Tomographies of Four Commonly Used Orthodontic Archwires”, Journal of Medical and Biological Engineering, 31(5)(2011)367-370. (SCI). Impact factor= 1.173; Rank= 73/87 in Engineering, biomedical. Publication date: 2011/11.
------------------------------------------------------------------------------------------------------------------------
41. Yin-Yu Chang*, Chi-Pang Chang, Ho-Yi Kao, “High temperature oxidation resistance of multilayered AlxTi1-xN/CrN coatings”, Thin Solid Films, 519 (2011) 6716-6720. (SCI). NSC 98-2221-E-451-006. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
42. Yin-Yu Chang*, Yaw-Nan Shieh, Ho-Yi Kao, “Optical properties of TiO2 thin films after Ag ion implantation”, Thin Solid Films, 519 (2011) 6935-6939. (SCI). NSC 99-2221-E-451-005. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
43. Heng-Li Huang, Yin-Yu Chang, Dan-Jae Lin, Yu-Fen Li, Kuan-Ting Chen, Jui-Ting Hsu, “Bone strain and initial stability uation of an immediately loaded dental implant on various bone quality and quantity: an in vitro study”, Clinical Oral Implants Research, 22 (2011) 691-698. (SCI). Impact factor= 3.723; Rank= 8/91 in Dentistry, oral surgery & medicine.
44. Shui-Yang Lien, Yin-Yu Chang, Jui-Hao Wang, Ko-Wei Weng, Ching-Hsun Chao, Chia-Fu Chen, “Characterization of HF-PECVD a-Si:H thin film solar cells using by OES studies”, Journal of Non-Crystalline Solids, 357 (2011)161-164. (SCI). NSC 98-2221-E-451-003 / 98-2622-E-451-001-CC3. Impact factor= 2.292; Rank= 4/28 in Materials science, ceramics.
45. P.Vijai Bharathy, Yin-Yu Chang, D.Nataraj, Q.Yang, Sheng-Min Yang, D.Mangalaraj, Lei Yang, Thomas J. Webster, “Effect of nickel incorporation on structural, nanomechanical and biocompatible properties of amorphous hydrogenated carbon thin films prepared by low energy biased target ion beam deposition”, Thin Solid Films, 519 (2010) 1623-1628. (SCI). Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
46. Heng-Li Huang, Yin-Yu Chang*, Meng-Cheng Lai, Cai-Rong Lin, Chih-Ho Lai, Tzong-Ming Shieh, “Antibacterial TaN-Ag Coatings on Titanium Dental Implants”, Surface & Coatings Technology, 205 (2010) 1636-1641. (SCI). NSC 99-2622-E-451-004-CC3 / NSC 98-2221-E-451-006. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
47. Yaw-Nan Shieh, Yin-Yu Chang*, “Influence of cobalt ion implantation on optical properties of titanium dioxide thin films”, Thin Solid Films, 518 (2010) 7464-7467. (SCI). Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
48. Yin-Yu Chang*, Sheng-Min Yang, “High Temperature oxidation behavior of multicomponent TiAlSiN coatings”, Thin Solid Films, 518 (2010) 534-537. (SCI) NSC 98-2221-E-451-006. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
49. Yin-Yu Chang*, Chi-Pang Chang, “High Temperature Stability of Multicomponent TiAlSiN and CrAlSiN Coatings”, Journal of Nanoscience and Nanotechnology, 10 (2010) 4762-4766. (SCI) NSC 98-2221-E-451-006. Impact factor= 1.134; Rank= 137/177 in Chemistry, Multidisciplinary.
50. Yin-Yu Chang*, Chi-Pang Chang, “Microstructural and mechanical properties of graded and multilayered AlxTi1-xN/CrN coatings synthesized by a cathodic-arc deposition process”, Surface & Coatings Technology, 204 (2009) 1030-1034. (SCI) NSC 97-2221-E-451-005. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
51. Yin-Yu Chang*, Chia-Yuan Hsiao, “High temperature oxidation resistance of multicomponent Cr-Ti-Al-Si-N coatings”, Surface & Coatings Technology, 204 (2009) 992-996. (SCI) NSC 97-2221-E-451-005. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
52. Yin-Yu Chang*, Shun-Jan Yang, Weite Wu, Yu-Chu Kuo, Jyh-Wei Lee, Chaur-Jeng Wang, “Mechanical properties of gradient and multilayered TiAlSiN hard coatings”, Thin Solid Films, 517/17 (2009) 4934-4937. (SCI) NSC 97-2221-E-451-005. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
53. C.C. Tseng, J.H. Hsieh, S.C. Jang, Y.Y. Chang, W. Wu, “Microstructural analysis and mechanical properties of TaN–Ag nanocomposite thin films”, Thin Solid Films, 517/17 (2009) 4970-4974. (SCI) Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
54. Yin-Yu Chang*, Shun-Jan Yang, Weite Wu, “Plasma analyses and structural properties of Cr-N-C-O coatings synthesized by a cathodic arc evaporation process”, Thin Solid Films, 517/14 (2009) 4240-4243. (SCI) NSC 95-2622-E-451-002-CC3. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
55. S.M. Yang, Y.Y. Chang, D.Y. Lin, D.Y. Wang, W. Wu, “Thermal stability of TiAlN and nanocomposite TiAlSiN thin films”, Journal of Nanoscience and Nanotechnology, 9 (2009) 1108-1112. (SCI) NSC-95-2221-E-451-002. Impact factor= 1.134; Rank= 137/177 in Chemistry, Multidisciplinary.
56. Yin-Yu Chang*, Chi-Pang Chang, Da-Yung Wang, Sheng-Min Yang, Weite Wu, “ High temperature oxidation resistance of Cr-Al-Si-N coatings synthesized by a cathodic-arc deposition process”, Journal of Alloys and Compounds, 461 (2008) 336-341. (SCI) NSC-95-2221-E-451-002. Impact factor= 4.650; Rank= 8/79 in Metallurgy & metallurgical engineering.
57. Sheng-Min Yang, Yin-Yu Chang, Dong-Yih Lin, Da-Yung Wang, Weite Wu, “Mechanical and tribological properties of multilayered TiSiN/CrN coatings synthesized by a cathodic arc deposition process”, Surface & Coatings Technology, 202 (2008) 2176-2181. (SCI) NSC-95-2221-E-451-002. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
58. S.M. Yang, Y.Y. Chang, D.Y. Lin, D.Y. Wang, W. Wu, “Microstructure characterization of multilayered TiSiN/CrN thin films”, Journal of Nanoscience and Nanotechnology 8 (2008) 2688–2692. (SCI) NSC-95-2221-E-451-002. Impact factor= 1.134; Rank= 137/177 in Chemistry, Multidisciplinary.
59. Yin-Yu Chang*, Shun-Jan Yang, Yu-Hsien Liu, Da-Yung Wang, “ Plasma properties of CrOx Films Synthesized by a Cathodic Arc Evaporation Process”, Thin Solid Films, 516/16 (2008) 5536-5540. (SCI) NSC 94-2745-E-007-URD. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
60. Yin-Yu Chang, Shun-Jan Yang, Da-Yung Wang, “Structural and Mechanical Properties of Cr-C-O Thin Films Synthesized by a Cathodic Arc Deposition Process”, Surface & Coatings Technology 220 (2007) 941-945. (SCI) NSC 95-2622-E-451-002-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
61. Sheng-Min Yang, Yin-Yu Chang, Da-Yung Wang, Dong-Yih Lin, WeiTe Wu, “Mechanical properties of nano-structured Ti-Si-N films syntheized by cathodic arc evaporation”, Journal of Alloys and Compounds, 440(2007) 375-379. (SCI) NSC-95-2221-E-451-002. Impact factor= 4.650; Rank= 8/79 in Metallurgy & metallurgical engineering.
62. Yin-Yu Chang, Da-Yung Wang, “Characterization of nanocrystalline AlTiN coatings synthesized by a cathodic-arc deposition process”, Surface & Coatings Technology, 201 (2007) 6699-6701. (SCI) NSC-94-2622-E-451-002-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
63. Yin-Yu Chang, Shun-Jan Yang, Da-Yung Wang, “Characterization of TiCr(C,N)/amorphous carbon coatings synthesized by a cathodic-arc deposition process”, Thin Solid Films 515 (2007) 4722-4726. (SCI) NSC-94-2218-E-451-005. Impact factor= 2.030; Rank= 81/155 in Physics, applied Science.
64. Ming-che Chen, Che-wei Kuo, Chia-ming Chang, Chih-chun Hsieh, Yin-Yu Chang, Weite Wu, “Diffusion and formation of intermetallic compounds during accumulative roll-bonding of Al/Mg alloys”, Materials s 48 (2007) 2595 – 2598. (SCI) Impact factor= 0.787; Rank= 22/76 in Metallurgy & metallurgical engineering.
65. Yin-Yu Chang, Shun-Jan Yang, Da-Yung Wang, “Structural and mechanical properties of AlxTi1-xN/CrN coatings synthesized by a cathodic-arc deposition process”, Surface & Coatings Technology, 201 (2006) 4209-4214. (SCI) NSC-94-2622-E-451-002-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
66. Yin-Yu Chang, Da-Yung Wang, Chi-Yung Hung, “Mechanical properties of TiAlN/CrN nanolayered coatings synthesized by a cathodic-arc deposition process”, Solid State Phenomena 118 (2006) 323-327. (EI) NSC-94-2622-E-451-002-CC3.
67. Yin-Yu Chang, Da-Yung Wang, “Structural and electrical properties of Cr doped a-C:H films synthesized by a cathodic-arc activated deposition process”, Surface & Coatings Technology, 200(2006) 3170-3174. (SCI) NSC92-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
68. 汪大永､張銀祐､洪志穎, “陰極電弧沈積氮化鋁鈦/氮化鉻奈米多層薄膜之開發與應用”, 科學與工程技術,第一卷第二期(2005/09),pp.1-6｡ISBN/1816-6563.
69. 汪大永, 張銀祐, “陰極電弧沈積氮化鉻鋁鈦薄膜之開發與應用”, 陶業季刊, 第二十四卷, 第三期(2005)1-12. ISBN/ 1012-5442.
70. Yin-Yu Chang, Da-Yung Wang, C.Y. Hung, “Structural and Mechanical Properties of Nanolayered TiAlN/CrN Coatings Synthesized by a Cathodic-Arc Deposition Process”, Surface & Coatings Technology, 200 (2005) 1702-1708. (SCI) NSC93-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
71. Da-Yung Wang, Yin-Yu Chang, Yu-Wei Huang, “Deposition of diamond-like carbon films containing metal elements on biomedical Ti alloys”, Surface & Coatings Technology, 200(2005) 2175-2180. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
72. Yin-Yu Chang, Da-Yung Wang, “Corrosion behavior of electroless nickel enhanced by titanium ion implantation”, Surface & Coatings Technology, 200(2005) 2187-2191. (SCI) NSC92-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
73. Yin-Yu Chang, Da-Yung Wang, “Structural and electrical properties of nitrogen-doped a-C:H films synthesized by a cathodic-arc activated deposition process”, Thin Solid Films, 485(2005)1-7. (SCI) NSC92-2622-E-451-001-CC3. Impact factor= 2.030; Rank= 9/19 in Materials science, coatings & films.
74. Yin-Yu Chang, Da-Yung Wang, “Corrosion behavior of CrN coatings enhanced by niobium ion implantation”, Surface & Coatings Technology, 188-189C (2004) 478-483. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
75. Yin-Yu Chang, Da-Yung Wang, Chi-How Chang, WeiTe Wu, “Tribological analysis of nano-composite diamond-like carbon films deposited by unbalanced magnetron sputtering”, Surface & Coatings Technology, 184 (2004) 349-355. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
76. Yin-Yu Chang, Da-Yung Wang, WeiTe Wu, “Tribological Enhancement of CrN Coatings by Niobium and Carbon ion implantation”, Surface & Coatings Technology, 177-178C (2004) 441-446. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 3.784; Rank= 3/21 in Materials science, coatings & films.
77. Yin-Yu Chang, Da-Yung Wang, WeiTe Wu, “Characterization of Nitrogen-doped a-C:H Films Deposited by Cathodic-arc Activated Deposition Process”, Diamond & Related Materials, 12/10-11 (2003) 2077-2082. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 1.709; Rank= 70/225 in Materials science, multidisciplinary.
78. Yin-Yu Chang, Da-Yung Wang, WeiTe Wu, ”Catalysis effect of metal doping on Wear Properties of Diamond-like Carbon Films deposited by Cathodic-arc Activated Deposition Process”, Thin Solid Films 420–421 (2002) 241–247. (SCI) NSC91-2622-E-451-001-CC3. Impact factor= 2.030; Rank= 9/19 in Materials science, coatings & films.